LogoO-KAM Pro Help Center
LogoO-KAM Pro Help Center
HomepageO-KAM Pro Help Center
Help Center
User Manual
Quick Start GuideO-KAM Pro User ManualMini Camera User Manual4G LTE Solar Camera — Quick InstallationAdd Device Quick GuideSmart Care Camera User ManualBird Feeder Camera User ManualCB77WP Camera User ManualNVR User Manual
User Manual

Smart Care Camera User Manual

Device overview, system setup, registration, adding WiFi and 4G devices, video calls, device sharing and FAQ for the Smart Care Camera.

Smart Care Camera User Manual

This manual explains how to set up and use the Smart Care Camera with the O-KAM Pro app.

Table of Contents

  1. APP Download — 02
  2. Add WiFi Devices — 04-06
  3. Add 4G Devices — 07
  4. Device Sharing — 10

1 Device Overview

Front view of the Smart Care Camera with callouts 1, 2, 3, 4, 8 and 9, a close-up labelled Open the rubber cover with callouts 5, 6 and 7, and the base view with callout 14 Rear view of the Smart Care Camera with callouts 10 to 13
  1. One Click Call
  2. Night Light Button
  3. HD Lens
  4. Display Screen
  5. SIM Card Slot(4G Version)
  6. TF Card Slot
  7. Reset Hole
  8. One Click to Hang Up /One Click to Wake Up
  9. Mic
  10. Night Light
  11. Speaker
  12. Battery Switch
  13. Charging Port
  14. Screw Hole

2 Setting Up the System

1> Power on the device

2> Download O-KAM Pro APP

  • Search for "O-KAM Pro" in App Store or Google Play, or scan the QR code below to download the APP.
QR code with the O-KAM Pro logo in the centre, captioned Scan to Download

3> Register and Log In

  • Select "Register now", select the corresponding region, enter your account number and password to complete the registration and log in.
Please login screen and Register account screen in the O-KAM Pro app

4> Add Devices---WiFi Devices

Enable Bluetooth on your phone.

Select the device and connect

Go to the homepage, click "Red plus-in-a-circle add button" in the upper right corner, select the device you want to connect in the pop-up window, and click "Connect".

App homepage with the add button in the upper right corner, and the Found new device pop-up window with the connect button

Note: The number in the pop-up window must be consistent with the number below the QR code on the device.

Enter the correct WiFi and password.

Connect WiFi screen for entering the WiFi name and password, and the Prompt window confirming the WiFi name and password

Connection completed.

Get started.

Connecting screen and Binding device screen for choosing a camera name such as Garage, Front door or Living room

4> Add Devices---4G Devices

Scan the QR code on the device

Open the APP, log in your account, click "Red plus-in-a-circle add button" in the upper right corner to scan the QR code on the device.

Follow the instructions to complete the connection.

Note: The SIM card must be inserted into the 4G device first and ensure that the device is online.

App homepage with the add button, the Add devices scanning screen, and the Confirm that the device is ready for network configuration screen

5> Video Call

Click the device image and enter the live view page.

Start the video call

Click "Video call" to start a video call with the device.

App homepage showing the camera image, and the live view page with the Video call button

Call from the device

You can also make a video call to your phone by pressing the call button on the device.

Call button on the top of the camera, the incoming call notification on the phone lock screen, and the calling screen with hang up and answer buttons

3 Device Sharing

1> Go to "System settings"--"Share";

2> Share the QR code.

System settings screen with the Share button, and the QR code sharing screen

4 FAQ

Q: Turn on the battery switch but the device won't turn on?

A: The battery is low, plug it in and wait 3-5 minutes for charging.

Q: The battery switch is constantly on and the battery is depleted, but the device won't turn on when plugged in?

A: Turn the battery switch off and plug it in to turn it on. Or turn on the battery switch, plug it in and wait 3-5 minutes, or even longer, to charge and turn on the device.

Q: How to charge the battery?

A: Turn the battery switch to on and plug it in to charge. If the battery switch is turned off, the device can be turned on but cannot be charged when plugged in.

Related

  • How to Add a Device on the App
  • Install SIM Card
  • 4G Camera Fails to Be Added
  • Share Monitoring
  • Device Shows Offline on the App
  • Contact Us

Add Device Quick Guide

Two-step quick guide to downloading and registering the O-KAM Pro app and adding devices by QR code scan or Sonic network configuration.

Bird Feeder Camera User Manual

Device overview, app download and registration, Bluetooth permission, adding devices, AI Smart Service and AI Renewal for the Bird Feeder Camera.

Table of Contents

Smart Care Camera User Manual
Table of Contents
1 Device Overview
2 Setting Up the System
1> Power on the device
2> Download O-KAM Pro APP
3> Register and Log In
4> Add Devices---WiFi Devices
Enable Bluetooth on your phone.
Select the device and connect
Enter the correct WiFi and password.
Connection completed.
Get started.
4> Add Devices---4G Devices
Scan the QR code on the device
Follow the instructions to complete the connection.
5> Video Call
Click the device image and enter the live view page.
Start the video call
Call from the device
3 Device Sharing
1> Go to "System settings"--"Share";
2> Share the QR code.
4 FAQ
Q: Turn on the battery switch but the device won't turn on?
Q: The battery switch is constantly on and the battery is depleted, but the device won't turn on when plugged in?
Q: How to charge the battery?
Related