O-KAM Pro Help Center4G LTE Solar Camera — Quick Installation
Quick installation guide for the Wellnk-iot 4G LTE Cellular Solar Security Camera using the O-KAM app, covering setup, SIM and SD cards, device adding, PTZ, sharing, FAQ, and solar panel installation.
4G LTE Solar Camera — Quick Installation
Quick installation guide for the Wellnk-iot 4G LTE Cellular Solar Security Camera using the O-KAM app, for iOS and Android.
For support, contact [email protected] (WhatsApp: +8615818667373).
Device Connection
Download the O-KAM Pro app by scanning the QR code below or searching for it on the App Store / Google Play.
Sign up / Login
- Register an APP account and log in.
- Step 1: New users must sign up for an account and choose their country.
- Step 2: Click on Sign up, enter your email, username, and password. Complete the verification process and sign in to your account.
- If you already have an O-KAM PRO account, log in directly.
SIM Card & Micro SD Card Installation
The camera comes with
- A Wellnk-iot SIM card pre-installed in the SIM card slot. This camera is not able to work with any alien SIM cards.
- A 32GB Micro SD card pre-installed in the TF card slot. The built-in micro SD card slot supports a maximum capacity of 256GB.
- A built-in large-capacity battery.
Installation Steps
Open the black silicone cap
Open the black silicone cap on the camera and check if the SIM card and SD card are preinstalled in places.
Power on the camera
Open the white silicone cap on the rear of the camera and flip the toggle switch to ON, wait for the camera to start.
Close the caps
Push both silicone caps back to finish installation.
Add Device via APP – Method 1
Choose the add method
Choose between Scan QR code or 4G camera to add a device on the scan QR code interface.
Follow the instructions for the QR code method below, or use the 4G camera method described in Add Device via APP – Method 2.
Scan the camera's QR code
Utilize the APP's Scan QR Code function to scan the QR code on the camera device.
Confirm the indicators and bind
On the Please insert the SIM card screen, validate that the camera has triggered a sensory alert conveying "SIM card detected successfully, network connection successful," and that the camera's blue light is illuminated. Once these indicators are present, you may proceed by clicking Bind now.
Add Device via APP – Method 2
Confirm the indicators
On the Please insert the SIM card screen, validate that the camera has triggered a sensory alert conveying "SIM card detected successfully, network connection successful," and that the camera's blue light is illuminated. Once these indicators are present, you may proceed by clicking Next.
Scan the QR code
When it turns to the Scan the QR code interface, align your app's QR code with the camera lens at a distance of 15-30cm / 6-12 inches for scanning.
Installation Guide
Before drilling holes in your wall, be sure to review the following:
- Ensure that this camera has been successfully added to your O-KAM App and can stream video.
- The suggested installation height ranges from 3 to 4.5 meters (approximately 9.8 to 14 feet).
- The PIR (motion sensor) auto on/off light setting covers a range of approximately 12 meters (39 feet).
- Verify that the camera's line of sight is unobstructed.
Pan/Tilt/Zoom Operation
Slide control
Slide up, down, left and right on the live screen to move the camera.
PTZ Control
- Rotation control — rotate the camera.
- Live screen zoom — zoom the live screen.
PTZ and functions
Frequently viewed bit PTZ calibration
Available controls include Vertical center, Horizontal center, Pre-position, and PTZ correction. You can also add preset positions (Add presets).
Camera Features
The camera features include Night Vision, Remote shutdown, Siren, White light, Screenshot, Record, Motion Detection, Activity Zone, and Human Tracking.
Device Sharing
When open permission is shared, the recipient can control the device's functions. If the grantor disables the permission, the recipient can only view the video without the ability to adjust the settings.
FAQ
Q1. Unable to add a camera for the first time?
A1:
- When setting up a camera for the first time, make sure to correctly insert the SIM card with the chip facing downwards. You should hear a "click" sound to confirm proper insertion.
- Make sure that the camera is powered on and that the blue indicator is lit. The camera should prompt "SIM card detection success, network connection success."
Q2. How can I share my camera with family and friends?
A2: Open the app and select your camera on the homepage. Navigate to camera settings and click Share to access the sharing page. An automatic generation of a QR code will occur. Your friends can then open the app, scan the QR code on their mobile phones, and gain access permission.
Q3. What should I do if the camera is not powering on?
A3: If the camera is not powering on, it may be due to drained batteries that need recharging. Try assembling the camera with a solar panel and place the solar panel in direct sunlight for some time to recharge the batteries.
Q4. What should I do if the camera disconnects?
A4: Verify if the data plan has expired. If it has, you will need to acquire additional data plans and reset the camera to restore connectivity.
Q5. How to reset the camera?
A5: To reset the camera, power it on, then long press the RESET button located beneath the black silicone cover on top of the camera. Afterward, turn off the camera and then power it on.
Q6. The Micro SD card cannot be recognized?
A6: After inserting the SD card into the camera's SD card slot, check if the capacity of the SD card is displayed in the System Settings > TF Record Settings section of the device in the app. If it shows "No SD card detected," it indicates that the SD card recognition failed. Here are some troubleshooting steps to resolve the issue:
- Ensure the Micro SD card is inserted facing upwards in the camera's SD card slot with the correct orientation.
- Ensure the SD card is recognized by the computer.
- Only use the FAT32 format.
- Recommended SD card capacity is between 2-256GB.
- Use a high-speed SD card of Class 4 and above.
- Try inserting and removing the SD card several times.
- Test with another SD card.
- Allow some time for the camera to recognize the SD card. After inserting the card, wait for about 30 seconds before checking again.
Solar Panel Installation Guide
Optimize solar panel placement for maximum sun exposure year-round to power your camera efficiently. Solar panel energy output is influenced by weather, season, location, and more.
Tilt and mount the panel
Tilt the panel 30-35°, wipe its surface regularly with a soft, damp cloth, and securely mount it using included screws, anchoring if needed for stability on soft or uneven surfaces.
Attach the gimbal
Attach the gimbal to the back of the solar panel using the provided screws and tighten it securely with the included nut.
Set the locking screw
Screw the locking screw in place, ensuring the universal joint is angled upwards.
Adjust left and right
Loosen the locking screw when adjusting the solar panel left or right. Turn the sleeve rod to position the panel, then tighten the locking screw once it is in place.
Tip: After completing the installation, please ensure that all locking mechanisms are securely tightened.
Basic Parameters
| Parameter | Specification |
|---|---|
| Cable length | 3m |
| Operating voltage | 5V DC |
| Operating temperature | -20℃ to 70℃ (-4℉ to 158℉) |
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. The operation must meet the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Related
Mini Camera User Manual
Setup and usage guide for the O-KAM Pro Mini Camera, covering components, indicator lights, network configuration, and safety.
Add Device Quick Guide
Two-step quick guide to downloading and registering the O-KAM Pro app and adding devices by QR code scan or Sonic network configuration.